Enhancement of the Electroluminescence and Strain Properties of Dielectric Elastomeric Actuators Using Liquid Metal Reflectors.

We report on the enhancement of the light-emitting and mechanical performance of multifunctional dielectric elastomeric actuators by combining liquid eutectic gallium indium metal with a stretchable and transparent hybrid electrode composed of silver nanowires (AgNWs) and carbon nanotubes (CNTs). The device shows improved optical properties, electrical conductivity, and stability for electroluminescent dielectric elastomer actuators compared with previous works. Combining single-walled CNTs (SWCNTs) with AgNWs impeded the chemical reaction between the liquid metal and AgNWs, resulting in a more stable operation of the device. The maximum luminance and maximum strain of the electroluminescent dielectric elastomer actuator increased by 50% (from 300 to 450 cd m-2) and 44% (from 85 to 122%), respectively.

Biomimetic virus-based soft niche for ischemic diseases.

The essential therapeutic cues provided by a nanofibrous arginine-glycine-aspartic acid-engineered M13 phage were exploited as extracellular matrix (ECM)-mimicking niches, contributing to de novo soft tissue niche engineering. The interplay of biomimetic phage cues with surrounding organ tissues was identified, and cells were implanted between tissues to achieve an appropriate soft tissue niche that enables the proper functioning of the implanted stem cells at the injured site. With the polyacrylamide (PA) hydrogel mimicking the soft tissue organ stiffness ranges, it was found that biochemical and topological cues in conjunction with the ∼1-2 kPa elastic and mechanical cues of engineered phage nanofibers in soft tissues efficiently enhance the desired response of implanted stem cells. This phage cue with angiogenic and antioxidant functions overcomes the pathological environment to support implanted cells and surrounding soft tissues at the ischemic site, thereby successfully decreasing myogenic degeneration, minimizing fibrosis, and enhancing blood vessel regeneration with M2 macrophage polarization by improving the survival of the implanted endothelial progenitor cells (EPC) in an ischemic mouse model. These biomimetic phage nanofiber cues are considerably supportive of cell therapy, as they establish promising therapeutic extracellular de novo soft tissue niches for curing ischemic diseases.

M13 Virus Triboelectricity and Energy Harvesting.

Triboelectrification is a phenomenon that generates electric potential upon contact. Here, we report a viral particle capable of generating triboelectric potential. M13 bacteriophage is exploited to fabricate precisely defined chemical and physical structures. By genetically engineering the charged structures, we observe that more negatively charged phages can generate higher triboelectric potentials and can diffuse the electric charges faster than less negatively charged phages can. The computational results show that the glutamate-engineered phages lower the LUMO energy level so that they can easily accept electrons from other materials upon contact. A phage-based triboelectric nanogenerator is fabricated and it could produce ∼76 V and ∼5.1 µA, enough to power 30 light-emitting diodes upon a mechanical force application. Our biotechnological approach will be useful to understand the electrical behavior of biomaterials, harvest mechanical energy, and provide a novel modality to detect desired viruses in the future.

All-solid-state flexible supercapacitor based on nanotube-reinforced polypyrrole hollowed structures.

Supercapacitors are strong future candidates for energy storage devices owing to their high power density, fast charge-discharge rate, and long cycle stability. Here, a flexible supercapacitor with a large specific capacitance of 443 F g-1 at a scan rate of 2 mV s-1 is demonstrated using nanotube-reinforced polypyrrole nanowires with hollowed cavities grown vertically on a nanotube/graphene based film. Using these electrodes, we obtain improved capacitance, rate capability, and cycle stability for over 3000 cycles. The assembled all-solid-state supercapacitor exhibits excellent mechanical flexibility, with the capacity to endure a 180° bending angle along with a maximum specific and volumetric energy density of 7 W h kg-1 (8.2 mW h cm-3) at a power density of 75 W kg-1 (0.087 W cm-3), and it showed an energy density of 4.13 W h kg-1 (4.82 mW h cm-3) even at a high power density of 3.8 kW kg-1 (4.4 W cm-3). Also, it demonstrates a high cycling stability of 94.3% after 10 000 charge/discharge cycles at a current density of 10 A g-1. Finally, a foldable all-solid-state supercapacitor is demonstrated, which confirms the applicability of the reported supercapacitor for use in energy storage devices for future portable, foldable, or wearable electronics.

Electroluminescent soft elastomer actuators with adjustable luminance and strain.

We demonstrate a multifunctional soft actuator that exhibits both electroluminescence (EL) and soft actuation with a strain of 85% and a maximum luminance of 300 cd m-2, superior to previous devices with individual functions. This was possible by combining several strategies such as the development of highly conductive, transparent, and stretchable electrodes, incorporation of high-k nanoparticles to increase the electric field applied to the EL particles, and application of AC + DC composite signals to simplify the device structure. We expect this research to contribute to the development of new soft devices that can further enhance human-machine interactions in color displaying actuator applications.

Electric Field Assisted Self-Assembly of Viruses into Colored Thin Films.

Filamentous viruses called M13 bacteriophages are promising materials for devices with thin film coatings because phages are functionalizable, and they can self-assemble into smectic helicoidal nanofilament structures. However, the existing "pulling" approach to align the nanofilaments is slow and limits potential commercialization of this technology. This study uses an applied electric field to rapidly align the nanostructures in a fixed droplet. The electric field reduces pinning of the three-phase contact line, allowing it to recede at a constant rate. Atomic force microscopy reveals that the resulting aligned structures resemble those produced via the pulling method. The field-assisted alignment results in concentric color bands quantified with image analysis of red, green, and blue line profiles. The alignment technique shown here could reduce self-assembly time from hours to minutes and lend itself to scalable manufacturing techniques such as inkjet printing.

Facile fabrication of self-assembled ZnO nanowire network channels and its gate-controlled UV detection.

We demonstrate a facile way to fabricate an array of gate-controllable UV sensors based on assembled zinc oxide nanowire (ZnO NW) network field-effect transistor (FET). This was realized by combining both molecular surface programmed patterning and selective NW assembly on the polar regions avoiding the nonpolar regions, followed by heat treatment at 300 °C to ensure stable contact between NWs. The ZnO NW network FET devices showed typical n-type characteristic with an on-off ratio of 105, transconductance around 47 nS, and mobility around 0.175 cm2 V- 1 s- 1. In addition, the devices showed photoresponsive behavior to UV light that can be controlled by the applied gate voltage. The photoresponsivity was found to be linearly proportional to the channel voltage Vds, showing maximum photoresponsivity at Vds = 7 V.

Modified Floating Electrode-Based Sensors for the Quantitative Monitoring of Drug Effects on Cytokine Levels Related with Inflammatory Bowel Diseases.

Modified floating electrode-based sensors were developed to quantitatively monitor the levels of tumor necrosis factor α (TNF-α), a pro-inflammatory cytokine related with inflammatory bowel disease (IBD), and to evaluate the effect of drugs on the cytokine levels. Here, antibodies (anti-TNF-α) were immobilized on the floating electrodes of carbon nanotube devices, enabling selective and real-time detection of TNF-α among various cytokines linked to IBD. This sensor was able to measure the concentrations of TNF-α with a detection limit of 1 pg/L, allowing the quantitative estimation of TNF-α secretion from mouse macrophage Raw 264.7 cells stimulated by lipopolysaccharides (LPS). Notably, this method also allowed us to monitor the anti-inflammatory effect of a drug, lupeol, on the activation of the LPS-induced nuclear factor κB signaling in Raw 264.7 cells. These results indicate that our novel TNF sensor can be a versatile tool for biomedical research and clinical applications such as screening drug effects and monitoring inflammation levels.

Cellulose Nanocrystal-Based Colored Thin Films for Colorimetric Detection of Aldehyde Gases.

We demonstrate a controllable and reliable process for manifesting color patterns on solid substrates using cellulose nanocrystals (CNCs) without the use of any other chemical pigments. The color can be controlled by adjusting the assembly conditions of the CNC solution during a dip-and-pull process while aiding the close packing of CNCs on a solid surface with the help of ionic-liquid (1-butyl-3-methylimidazolium) molecules that screen the repelling electrostatic charges between CNCs. By controlling the pulling speed from 3 to 9 µm/min during the dip-and-pull process, we were able to control the film thickness from 100 to 300 nm, resulting in films with different colors in the visible range. The optical properties were in good agreement with the finite-difference time-domain simulation results. By functionalizing these films with amine groups, we developed colorimetric sensors that can change in color when exposed to aldehyde gases such as formaldehyde or propanal. A principal component analysis showed that we can differentiate between different aldehyde gases and other interfering molecules. We expect that our approach will enable inexpensive and rapid volatile organic compound detection with on-site monitoring capabilities.

Engineered Phage Matrix Stiffness-Modulating Osteogenic Differentiation.

Herein, we demonstrate an engineered phage mediated matrix for osteogenic differentiation with controlled stiffness by cross-linking the engineered phage displaying Arg-Gly-Asp (RGD) and His-Pro-Gln (HPQ) with various concentrations of streptavidin or polymer, poly(diallyldimethylammonium)chloride (PDDA). Osteogenic gene expressions showed that they were specifically increased when MC3T3 cells were cultured on the stiffer phage matrix than the softer one. Our phage matrixes can be easily functionalized using chemical/genetic engineering and used as a stem cell tissue matrix stiffness platform for modulating differential cell expansion and differentiation.

Highly sensitive and flexible strain sensors based on patterned ITO nanoparticle channels.

We demonstrate a highly sensitive and flexible bending strain sensor using tin-doped indium oxide (ITO) nanoparticles (NPs) assembled in line patterns on flexible substrates. By utilizing transparent ITO NPs without any surface modifications, we could produce strain sensors with adjustable gauge factors and optical transparency. We were able to control the dimensional and electrical properties of the sensors, such as channel height and resistance, by controlling the NP assembly speed. Furthermore, we were able to generate controlled gauge factor with values ranging from 18 to 157, which are higher than previous cases using metallic Cr NPs and Au NPs. The alignment of the ITO NPs in parallel lines resulted in low crosstalk between the transverse and longitudinal bending directions. Finally, our sensor showed high optical transmittance, up to ∼93% at 500 nm wavelength, which is desirable for flexible electronic applications.

Highly flexible and transparent dielectric elastomer actuators using silver nanowire and carbon nanotube hybrid electrodes.

We demonstrate a dielectric elastomer actuator (DEA) with a high areal strain value of 146% using hybrid electrodes of silver nanowires (AgNWs) and single-walled carbon nanotubes (SWCNTs). The addition of a very small amount of SWCNTs (∼35 ng mm-2) to a highly resistive AgNW network resulted in a remarkable reduction of the electrode sheet resistance by three orders, increasing the breakdown field by 183% and maximum strain, while maintaining the reduction of optical transmittance within 11%. The DEA based on our transparent and stretchable hybrid electrodes can be easily fabricated by a simple vacuum filtration and transfer process of the electrode film on a pre-strained dielectric elastomer membrane. We expect that our approach will be useful in the future for fabricating stretchable and transparent electrodes in various soft electronic devices.

Trapped charge-driven degradation of perovskite solar cells.

Perovskite solar cells have shown unprecedent performance increase up to 22% efficiency. However, their photovoltaic performance has shown fast deterioration under light illumination in the presence of humid air even with encapulation. The stability of perovskite materials has been unsolved and its mechanism has been elusive. Here we uncover a mechanism for irreversible degradation of perovskite materials in which trapped charges, regardless of the polarity, play a decisive role. An experimental setup using different polarity ions revealed that the moisture-induced irreversible dissociation of perovskite materials is triggered by charges trapped along grain boundaries. We also identified the synergetic effect of oxygen on the process of moisture-induced degradation. The deprotonation of organic cations by trapped charge-induced local electric field would be attributed to the initiation of irreversible decomposition.

Efficiency enhancement in a backside illuminated 1.12 µm pixel CMOS image sensor via parabolic color filters.

The shrinkage of pixel size down to sub-2 µm in high-resolution CMOS image sensors (CISs) results in degraded efficiency and increased crosstalk. The backside illumination technology can increase the efficiency, but the crosstalk still remains an critical issue to improve the image quality of the CIS devices. In this paper, by adopting a parabolic color filter (P-CF), we demonstrate efficiency enhancement without any noticeable change in optical crosstalk of a backside illuminated 1.12 µm pixel CIS with deep-trench-isolation structure. To identify the observed results, we have investigated the effect of radius of curvature (r) of the P-CF on the efficiency and optical crosstalk of the CIS by performing an electromagnetic analysis. As the r of P-CF becomes equal to (or half) that of the microlens, the efficiencies of the B-, G-, and R-pixels increase by a factor of 14.1% (20.3%), 9.8% (15.3%), and 15.0% (15.7%) with respect to the flat CF cases without any noticeable crosstalk change. Also, as the incident angle increases up to 30°, the angular dependence of the efficiency and crosstalk significantly decreases by utilizing the P-CF in the CIS. Meanwhile, further reduction of r severely increases the optical crosstalk due to the increased diffraction effect, which has been confirmed with the simulated electric-field intensity distribution inside the devices.

Carbon and metal nanotube hybrid structures on graphene as efficient electron field emitters.

We report a facile and efficient method for the fabrication of highly-flexible field emission devices by forming tubular hybrid structures based on carbon nanotubes (CNTs) and nickel nanotubes (Ni NTs) on graphene-based flexible substrates. By employing an infiltration process in anodic alumina oxide (AAO) templates followed by Ni electrodeposition, we could fabricate CNT-wrapped Ni NT/graphene hybrid structures. During the electrodeposition process, the CNTs served as Ni nucleation sites, resulting in a large-area array of high aspect-ratio field emitters composed of CNT-wrapped Ni NT hybrid structures. As a proof of concepts, we demonstrate that high-quality flexible field emission devices can be simply fabricated using our method. Remarkably, our proto-type field emission devices exhibited a current density higher by two orders of magnitude compared to other devices fabricated by previous methods, while maintaining its structural integrity in various bending deformations. This novel fabrication strategy can be utilized in various applications such as optoelectronic devices, sensors and energy storage devices.

Synaptic compartmentalization by micropatterned masking of a surface adhesive cue in cultured neurons.

Functions of neuronal circuit are fundamentally modulated by its quality and quantity of connections. Assessment of synapse, the basic unit for a neuronal connection, is labor-intensive and time-consuming in conventional culture systems, due to the small size and the spatially random distribution. In the present study, we propose a novel 'synapse compartmentalization' culture system, in which synapses are concentrated at controlled locations. We fabricated a negative dot array pattern by coating the entire surface with poly-l-lysine (PLL) and subsequent microcontact printing of 1) substrates which mask positive charge of PLL (Fc, BSA and laminin), or 2) a chemorepulsive protein (Semaphorin 3F-Fc). By combination of physical and biological features of these repulsive substrates, functional synapses were robustly concentrated in the PLL-coated dots. This synapse compartmentalization chip can be combined with the various high-throughput assay formats based on the synaptic morphology and function. Therefore, this quantifiable and controllable dot array pattern by microcontact printing will be potential useful for bio-chip platforms for the high-density assays used in synapse-related neurobiological studies.

Fully Automated Field-Deployable Bioaerosol Monitoring System Using Carbon Nanotube-Based Biosensors.

Much progress has been made in the field of automated monitoring systems of airborne pathogens. However, they still lack the robustness and stability necessary for field deployment. Here, we demonstrate a bioaerosol automonitoring instrument (BAMI) specifically designed for the in situ capturing and continuous monitoring of airborne fungal particles. This was possible by developing highly sensitive and selective fungi sensors based on two-channel carbon nanotube field-effect transistors (CNT-FETs), followed by integration with a bioaerosol sampler, a Peltier cooler for receptor lifetime enhancement, and a pumping assembly for fluidic control. These four main components collectively cooperated with each other to enable the real-time monitoring of fungi. The two-channel CNT-FETs can detect two different fungal species simultaneously. The Peltier cooler effectively lowers the working temperature of the sensor device, resulting in extended sensor lifetime and receptor stability. The system performance was verified in both laboratory conditions and real residential areas. The system response was in accordance with reported fungal species distribution in the environment. Our system is versatile enough that it can be easily modified for the monitoring of other airborne pathogens. We expect that our system will expedite the development of hand-held and portable systems for airborne bioaerosol monitoring.

Selective and Sensitive Sensing of Flame Retardant Chemicals Through Phage Display Discovered Recognition Peptide.

We report a highly selective and sensitive biosensor for the detection of an environmentally toxic molecule, decabrominated diphenyl ether (DBDE), one of the most common congeners of the polybrominated frame retardants (polybrominated diphenyl ether (PBDE)), using newly discovered DBDE peptide receptors integrated with carbon nanotube field-effect transistors (CNT-FET). The specific DBDE peptide receptor was identified using a high-throughput screening process of phage library display. The resulting binding peptide carries an interesting consensus binding pocket with two Trp-His/Asn-Trp repeats, which binds to the DBDE in a multivalent manner. We integrated the novel DBDE binding peptide onto the CNT-FET using polydiacetylene coating materials linked through cysteine-maleimide click chemistry. The resulting biosensor could detect the desired DBDE selectively with a 1 fM detection limit. Our combined approaches of selective receptor discovery, material nanocoating through click chemistry, and integration onto a sensitive CNT-FET electronic sensor for desired target chemicals will pave the way toward the rapid development of portable and easy-to-use biosensors for desired chemicals to protect our health and environment.

Bi-Assisted CdTe/CdS Hierarchical Nanostructure Growth for Photoconductive Applications.

We developed a method to control the structure of CdTe nanowires by adopting Bi-mixed CdTe powder source to a catalyst-assisted chemical vapor deposition, which allowed us to fabricate CdTe/CdS hierarchical nanostructures. We demonstrated that diverse nanostructures can be grown depending on the combination of the Bi powder and film catalysts. As a proof of concepts, we grew CdTe/CdS branched nanowires for the fabrication of photodetectors. The hierarchical nanostructure-based photodetectors showed an improved photoresponsivity compared to the single CdTe nanowire (NW)-based photodetector. Our strategy can be a simple but powerful method for the development of advanced optoelectronic devices and other practical applications.

Real-time detection of chlorine gas using Ni/Si shell/core nanowires.

We demonstrate the selective adsorption of Ni/Si shell/core nanowires (Ni-Si NWs) with a Ni outer shell and a Si inner core on molecularly patterned substrates and their application to sensors for the detection of chlorine gas, a toxic halogen gas. The molecularly patterned substrates consisted of polar SiO2 regions and nonpolar regions of self-assembled monolayers of octadecyltrichlorosilane (OTS). The NWs showed selective adsorption on the polar SiO2 regions, avoiding assembly on the nonpolar OTS regions. Utilizing these assembled Ni-Si NWs, we demonstrate a sensor for the detection of chlorine gas. The utilization of Ni-Si NWs resulted in a much larger sensor response of approximately 23% to 5 ppm of chlorine gas compared to bare Ni NWs, due to the increased surface-to-volume ratio of the Ni-Si shell/core structure. We expect that our sensor will be utilized in the future for the real-time detection of halogen gases including chlorine with high sensitivity and fast response.